White Rodgers 1F80 Thermostat is Part of the 80 Series
And Comes with a Select Backlit Display and Compressor Lockout
Description
White Rodgers 1F80224 Thermostat incorporates microcomputer action to precisely control the temperature and the time to bring you exact 24 hour programming.To fit your preferences, the 1F80-224 converts Farenheit or Celsius and features a HOLD temperature so that you can adjust your pre-programmed setting if you so choose.
The LCD screen consistently provides you with a display setpoint and alternates time and temperatures on your screen.
EnergyStar approved, this thermostat is the way to go!
Specifications
- Wire Line Terminals: RC, RH, W, Y, G, O, B, B And O Terminals For Single Stage Heat
- Pumps (No Auxiliary Heat) Or Damper Operation
- 8 To 30 VAC, 50/60 Hz or DC
- 0.05 To 1.0 Amps (Load Per Terminal)
- 1.5 Amps Maximum Total Load (All Terminals Combined)
- Setpoint Temperature Range: 45 To 90 Degrees F (7 To 32 Degress C.)
- Operating Ambient Temperature: 32 To 105 Degrees F
- Operating Humidity Range: 0 to 90% RH (Non-Condensing)
- Shipping Temperature Range: -4 To 150 Degress F
- Meets EnergyStar Requirements
- For Use With: Standard Heat, Cool, Or Heat Only Systems, Electric Heat Systems, Gas Or Oil Fired Systems, Gas Systems With Intermittent Ignition Devices (.I.D.) And/Or Vent Dampers, Hydronic (Hot Water Or Steam) Systems, Single-Stage Heat Pump Systems (No Auxiliary Heat), And Millivolt Systems
- DO NOT USE WITH MULTI-STAGE SYSTEMS, SYSTEMS EXCEEDING 30 VAC AND 1.5 AMPS, OR 3-WIRE ZONED HYDRONIC HEATING SYSTEMS
Benefits
- Four Separate Time/Temperature Settings
- Temporary HOLD
- Temperature Override Until Next Program Period
Additional Product Information |
View the 1F80-224 White Rodgers Thermostat Manual! |





View the 1F80-224 White Rodgers Thermostat Manual!