| Description: |
Duct-mounted temperature probe used to provide capacity control of heating and cooling equipment. Used with Honeywell Network Zoning System and single unit zone applications.
|
| Benefits: |
- When mounted in supply air duct, DATS senses delivered air temperature and cuts off heating or cooling when delivered air temperature goes above or below normal operating limits. Compares discharge air temperature to room air temperature and when out-of- tolerance, issues alert to W8735B.
- Requires three wires. Uses standard 18-22 gauge thermostat wire.
|
| Discharge Air Temperature Sensor by Honeywell (C7835A) Features: |
- Network Zoning: Yes
- Heat Pump Compatible: Yes
- Power Method Hardwired
- Application: Sensor
- Dimensions (in.): 3 7/8 in. high x 4 1/8 in. wide x 4 in. deep
- Dimensions (mm): 77 mm high x 105 mm wide x 102 mm deep
- Mounting: Duct Mounted
- Operating Humidity Range (% RH): 90% RH at 95 F non-condensing
- LEDs: Yes
- Electrical Ratings: 24 Vac
- Frequency: 60 Hz;50 Hz
- Ambient Temperature Range (F): -40 F to +170 F
- Ambient Temperature Range (C): -40 C to +77 C
- Tradeline Value: Tradeline
|
|
