| Description: |
Large easy-to-read display. Simple to use. Turn the dial to adjust the setpoint temperature. The temperature reading is easily seen from a distance. Backlit display. On-demand backlighting makes it easy to read the display in a dark room or hallway. No batteries required. The setpoint temperature is held permanently in memory in the event of a power failure. Powered through heating system controls. Easy installation and set up saves time and increases installer productivity. Heat Only.
Easily configurable by the use of DIP switches.
Fahrenheit or Celsius temperature display for added flexibility.
Selectable heating cycle rates (1, 3, 6, 9 CPH) for a variety of applications.
Decorative cover plate is available to cover marks on the wall or to mount the T8775 Thermostat to an electrical box.
|
| Benefits: |
- No batteries required. The temperature setting is held permanently in memory in the event of a power failure.
- Honeywell T8775A has a large easy-to-read display. The temperature reading is easily seen from a distance.
|
| Honeywell T8775A The Digital, Heat only, Round Non-Programmable Thermostat Features: |
- Electrical Ratings:
- Heating: .02 to 1.5 A run; 3.5A inrush.
- Fan: .02 to 0.5 A run; 2.5A inrush.
- 24 Vac nominal: 18 Vac to 30 Vac, 60Hz.
- 40°F to 90°F (4.5°C to 32.0°C) in heating.
- Heating Only
- Temperature Ratings:
- Setting Range:
- Ambient Range:
- 40°F to 110°F (4.4°C to 43.3°C).
- Humidity Ratings: 5% to 90% RH, non-condensing.
- Mounting Hardware:
- diameter by ? in. (19 mm) length.
- Sheet metal screws: Two 1-in. (25 mm) 4-24, type AB.
- Drywall anchors: Two conical anchors, 3/16 in. (5 mm)
- 4074 FAB Resistor:
- 1 Kohm, 3 Watts.
- Installation Instructions packed with resistor.
- Batteries: Not required.
- Finish: Premier White®.
|
|
View the T8775A1009 Honeywell Thermostat Manual! 
